Position：
Home >> NEWS >> Industry News
28
2013-10Us July Markit manufacturing purchasing managers index
Economists on average had expected a gain of 52.8, according to a Bloomberg survey. The June flash PMI came in at 52.2 points.
28
2013-10Application of molybdenum and molybdenum materials in petrochemical industry
The density of molybdenum is 10.2 g/cc. Melting point is 2610 ℃. The boiling point of 5560 ℃. Molybdenum powder is pressed into green billet by isostatic pressure and sintered at about 2100 ℃, and hot processed at 870 ~ ...
28
2013-10Application of molybdenum plate, tube and rod in glass industry
It has small expansion coefficient, high conductivity and good thermal conductivity. It does not react with hydrochloric acid, hydrofluoric acid and alkali solution at room temperature, but only dissolves in nitric acid,...
28
2013-10Tantalum rod, tantalum board, tantalum tube
The texture of tantalum is very hard, tungsten plate, molybdenum plate, tungsten rod, molybdenum rod, tungsten tube, molybdenum tube, tungsten crucible, molybdenum crucible hardness can reach 6-6.5. Its melting point is ...
28
2013-10Tungsten plate, tungsten rod, tungsten tube, tungsten crucible, military applica...
Alloys of tungsten and other refractory metals (tantalum, niobium, molybdenum, rhenium) are used as thermally strong materials in aerospace and rocket technology, as well as in other sectors that require high thermal str...
28
2013-10Use of niobium plate, niobium rod and niobium tube
With high temperature resistance, good strength and stiffness, tantalum is a high quality material for making heating parts, heat insulation parts and charging vessels for vacuum high temperature furnaces, and for making...
